Tutorial : Totoro sleeping in a bottle

Hello hello,

Long time no post again..
Just posting to say that I’m actually on holiday in a week. However, it’s also coming up to my end of year exams, so I can’t promise the amount of new posts you’ll be seeing.

Although, after 22 November I’ll be truely free :D ! YEY

—–

For now, Totoro sleeping in a bottle.

—–

Materials

Materials

  • Brown clay
  • Dark green clay
  • Light green clay
  • Super sculpey
  • Black acrylic paint
  • White acrylic paint
  • Yellow Acrylic paint
  • Miniature glass bottle w/ cork
  • Deco gel or TLS

Adding Base

  • Mix the dark green and light green clay until you get a shade you want (mix enough of this colour to be able to make the whole background)
  • Add a small drop of TLS or deco gel in the bottom of the glass bottle.
  • Take out a small piece of the green clay and place it in the bottom to make the base
  • Even it out using a tool. As usual I chose my ball tool to add that texture

Adding Back

 

  • For this part, I used two different tweezer tools
  • Take some clay and place it in the bottle. Press it into the side of the glass
  • Take any tool you have (like a paintbrush etc), and use that to spread the clay around onto the sides of the class
  • I used the tweezers to help me to this, plus even out the surface

Complted back

 

  • With the rest of the clay, place it in the bottle. There needs to be enough so that you’ll be able to make the indent for Totoro to sit in.
  • You can see some texture I added by tweezers and needle tools

Adding more

 

  • Using tools, create an indent in which Totoro would be placed in.
  • There isn’t a set method to achieve this, so just play around and use angled tools (in my case, Tweezers) to create texture and the shape

Totoro

 

  • Take a small blob of super sculpey and make it so that one end is slightly narrower than the bottom end
  • Take some smaller blobs, flatten them and place it on the base shape
  • Using a very fine needle tool ( I used a real needle), add the texture which would be Totoro’s fur. I used the same technique as from my original Totoro in a bottle

Adding head

 

  • Bake for about 5-10 minutes
  • Then, take some more smaller blobs and create Totoros’ arm and his snout. You only need one arm because you’ll only be able to see one side of him
  • Bake for about 5-10 minutes

Completed

 

  • Take TINY blobs of clay and create his ears ( I accidently made my ears crooked)
  • Bake for 5 minutes

Testing in bottle

 

  • Place it in the background you made. You may have to adjust the indent slightly to that Tototor fits nice and snug

Paint

 

  • Using black, white and yellow paint mix light grey and light yellow

Painting

 

  • Add Totoro’s base coats,
  • I find that in order to get a really smooth coat, mixing the acrylic with water really helps
  • Once everything is as smooth as you like it to be, add tiny details such as his whiskers, eyes, nose and fur arrow things ^ ahahah

Painted completely

 

  • Here he is completely painted
  • You can really see there how crooked his ears were….

Overall

 

  • Add some TLS in the place where Totoro would sit and place him in
  • It looked a little empty so I made a tree stump with the brown clay
  • Bake whole bottle for about 10 minutes

——

Finished

 

Here he is completed !

——-

Overall, it took me about 5 hours to make him ^^
I hope this tutorial was easy enough to understand !

Thanks for reading ^^

-Cyn

 

Advertisements

Tutorial : No-face in a glass bottle

Hey guys !

It’s long overdue, but here is my “No-face in a bottle” ¬†from Spirited away tutorial. Even though it’s pretty time consuming to construct, the basic gist of it is very easy ^^
Originally, I was going to make that lamp to go in with No-face, but it was wayyy to hard… I didn’t really have the right wire to make the post part of it, and the scale was just too small for me to work on.

But anywho, if you can make it , kudos to you ! Add in anything you want into the bottle ^^ !

So let’s get started,,

Etsy Listing: Here

—-

Materials

Materials

  • Mini glass bottle with cork. This one measures about 4cm tall ( not including the cork) and 2cm in diameter.
  • White clay
  • Black
  • Green (any shade you want)
  • Brown (any shade you want)
  • Aluminium foil

Noface

  • Before you do anything, I brushed on a thick layer of glaze onto the cork. This is because it was a bit brittle, and to prevent any pieces from fall out , I’m sealing them in. (However, you can already see that some broke off in the materials image T__T )
  • Take the black and roll out the black. Roll it however long you want No-face to be, and make sure the top is more narrow than the end
  • Slowly and carefully, bend the top down, and flatten it to form No-face’s …. face..
  • Then, one you have the shape you’re satisfied with, take a blob of white and flatten it onto where it should go.
  • Bake, and when cooled, paint it.
  • Remember to use reference images to get it right !

Grass

  • For the grass, I mixed two shades of left over green
  • Place the blob into the bottle, and use a tool to flatten it out evenly.
  • Once it’s flattened out, you can add some texture by using a tool. Anything round will do.

Tree stump

  • For the tree, I mixed some black with brown
  • Take a small amount out from it and rolled it out.
  • Place it into the bottle
  • Then, using my pinky, I tried to flatten it down against the side of the bottle
  • To make it more secure, I used the end of a paintbrush, and really just evened out the clay suface.

Tinfoil

  • Then taking the foil, I made a small rectangle with it. This is approximately the same shape as the one in the bottle.
  • Take out a small blob from the brown and leave it aside . They are for the roots.
  • Take the remaining brown, and cover the foil

Finished tree

  • Once it’s covered, try your best to put it into the bottle. It might not fit the first time, so you can just distort the shape slightly, and then fix it once it’s in the bottle. This part was probably the hardest.
  • Then take a tool and add texture to your tree. I used the side of a pair of tweezers in this case.
  • From the brown you set aside, start rolling out small triangle/cone shapes, and put them into the bottle
  • Using a tool, blend it into the tree to create the roots
  • Remember to add texture !
  • Then, take your completed No-face from before, and place him inside your bottle. You may want to add some liquid clay to help hold him in place.

Then you’re done :D

Completed

—–

Simple ? Sort of  haha,,,
At first, I was going to make that scene where No-face is in the water. My Triple thick glaze had just arrived so I was going to test it out and use it as the water. I added some blue food colouring , made some kois, lily pads and was planning to put No-face in there.

Unfortunately, when I was baking the clay , I left it in the oven and forgot about it……. everything was burnt, and No-face’s white mask was brown T___T. So that tutorial of No-face up there is the first one I made. The completed one is a new one that I made, so you can sort of see the subtle differences in shape.

Failed no face

Here he is before baking, and all those ugly lilly pads….
The Kois I originally made took REALLY long, and was really difficult… I can’t believe I burnt it.. =”=
But yes. Even though No-face was burnt, I painted over it with white paint and placed him in the bottle anyways.
Little did I know that the glaze would take so long to dry, and that the colouring would just evaporate….

I ended up getting impatient ( it was welllll over 2 weeks), and used a tweezer to rip No-face and the layer of glaze out of the bottle.

I think I need to find some resin that I can use for such effects,,

Anyway, thanks for reading this rant,, oho

-Cyn

—-